DAIKIN 4-way blow ceiling 4 suspended unit

Unique Daikin unit for high spaces without suspended ceilings or free floor space

Product characteristics

Even spaces with ceilings up to 3.5 m. they can be heated or cooled very easily without loss of performance
High efficiency : - energy labelling up to a++ (cooling)/ a + (heating) - the compressor offers substantial efficiency improvements
Through the selection of a product R-32 reduce the environmental effects by 68% compared to R-410A, achieved lower power consumption thanks to high energy efficiency and low load coolant
It can be easily installed in both new building projects and renovation projects
Very small dimensions and easy installation
Re - use of existing R-22 or R-407C technology
Through a combination of technology R-32 Bluevolution reduce the environmental effects by 68% compared to R-410A, achieved lower power consumption thanks to high energy efficiency and low load coolant up to 16%
5 different flash angles can be programmed by remote control
Single internal unit series for R-32 and R-410A
Independent fin control: flexibility that fits any room layout without changing the location of the unit!
Ensures operation in heating and cooling function up to -15 ° C
Cooling PCB ensures reliable cooling as it is not affected by ambient temperature.
Elegant, modern housing with a finish of pure white (RAL9010) and Iron Grey (RAL7011) that fits easily with any interior space
Maximum tubing length up to 50m, minimum tubing length without restriction
Optimum comfort is ensured by automatic airflow adjustment at required load
External units for pair connection, for two, three, four internal units connection
The standard condensate pump with 500mm Lift increases the flexibility and speed of installation

Benefits

Condensate pump kit (standar)

Facilitates the drainage of condensates from the internal unit

Dehumidification programme

Allows to reduce humidity levels without fluctuations in room temperature

Independent fin control

Independent control of the flap via the wired remote control allows you to set easily the position of each flap individually, to each new configuration of room. Optional closing kits are also available

Inverter

Inverter compressors continuously adapt the speed of the compressor to the actual requirements. Fewer energy-consuming starts and stops result in reduced energy consumption (up to 30%) and more stable temperatures.

Infrastructure cooling

Removal of the continuous δημιουργίούμενης heat from the information technology equipment and servers in a reliable, efficient and flexible manner, to ensure maximum time smooth operation with simultaneous high-performance in the rate of investment

Fan only

The unit can be used as a fan, providing air without heating or cooling

Self-test

Simplifies the maintenance process by indicating system errors or malfunctions

Auto restart

After a power failure, the unit switches back on automatically in the initial settings

Automatic vertical fin movement

Option of automatic vertical movement of the air outlet fins for uniform air and temperature distribution throughout the room

Ability to connect two / three / four units

2,3 or 4 internal bands can be connected to a single external unit even if they have different performance. All internal units operate in the same cooling or heating program from the same remote control

Weekly timer

Can be set to start heating or cooling anytime on a daily or weekly basis

Prevent the generation of air currents

When the unit begins to heat or when the thermostat is turned off, the direction of output air is adjusted horizontally and the fan to low speed, preventing the creation of a stream. After preheating, the air flow direction and fan speed can be adjusted as desired